All work carried out conforms to the IEE Code of Practice for In-Service Inspection & Testing of Electrical Equipment.

Portable Appliance Testing consists of a series of inspections and electrical tests on each item. These tests vary depending on the class of the item.

A visual inspection is undertaken first to check for faults /damage to the:
• Plug Casing (Plugs are replaced free of charge if damaged)
• Damage to the flex of the appliance. (Cracked or cut)
• The wiring of the plug is checked to ensure correct and secure termination
• The fuse rating of the plug is checked. (Fuses are replaced free of charge, if required)
Minor repairs are also free of charge

Once these Visual tests have been carried out. A number of Electrical tests are performed depending on the class of the equipment.
• Insulation test.
• Earth bond test.
• Earth continuity test.
• Touch leakage test.
• Leakage test.
• Polarity test
Please Note: All the above tests constitute 1 full test, you are not charged for each of the above tests.

Appliance testing results are stored on our appliance tester and the electrical item marked accordingly with a pass or fail label.

These results are then compiled into a report and Emailed to you in PDF, electronic storage saves on paper but you may print them if required.

You will then be fully compliant with all relevant regulations.